New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Pasadena pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Why Pasadena Homeowners Choose ES Windows Windows & Doors
We’re an independent Es Windows in Pasadena service provider, and we work on these aluminum windows and doors every week. Homeowners call us when their horizontal rollers start dragging, when a 3-panel slider jumps its track, or when a single hung won’t stay up. The difference with us is simple: we diagnose the actual mechanism, use parts that match or beat the original spec, and lock a written price before we touch anything. Call (626) 657-5977 and you’ll get a real person, not a voicemail.
We’re not authorized by ES Windows, and we won’t pretend to be. What we are is a team that has pulled apart enough ES Windows 8000 Series single hungs, 9000 Series horizontal rollers, and 3-panel multi-slides across Pasadena’s Craftsman bungalows, Spanish Colonial Revivals, and mid-century ranches to know exactly what fails and why, and we also provide Es Windows service in Alhambra. Sean Mackey, our owner, trained in the building trades program at Los Angeles Trade-Technical College and has spent two decades getting window frames right. He’s the one who taught our techs to check rough-opening square before ordering anything. If the frame isn’t right, nothing else matters – let’s start there.
Why Trust Juniper Windows Pasadena for Your ES Windows Windows & Doors?
ES Windows builds with aluminum extrusions, and aluminum behaves differently in Pasadena’s sun than vinyl or wood. It expands and contracts through our hot, dry summers and cool winter nights. Over time, that movement loosens corner joinery on wide sliders, wears down nylon rollers, and compresses wool pile weatherstripping until air and dust sneak past. A technician who only knows generic window repair won’t catch the corner that’s drifted 1/8 inch out of square on a 12-foot 3-panel unit. Our techs measure for exactly that.
We carry aftermarket rollers, balancer springs, and weatherstripping that meet or exceed ES Windows original specifications. That matters for two reasons. First, turnaround is faster – we’re not waiting on a manufacturer shipment with a six-week lead time. Second, quality aftermarket parts often outperform the originals, especially sealed-bearing rollers that don’t flat-spot after a few Pasadena summers. We stand behind every repair with the 365-Day Done Right Promise: if it’s not right, we make it right, parts and labor, in writing, for a full year. Sean Mackey and his crew handle the work, background-checked and in uniform, with a live arrival time you can track on your phone.
Common ES Windows Windows & Doors Problems We Fix in Pasadena
- Worn nylon rollers in 9000 Series horizontal rollers. The original rollers in ES Windows horizontal rollers use nylon wheels that spin on unsealed bearings. Pasadena’s dust and grit work into the bearing race, the wheel stops spinning, and the sash drags across the track until it eventually derails. We replace them with sealed-bearing aftermarket units that keep rolling smoothly for years longer.
- Frame corners pulling out of square on wide 3-panel multi-slides. A 12-foot ES Windows 3-panel slider has a lot of aluminum hanging off those corner joints. Years of thermal expansion and contraction, plus a little settling in the wall, can shift a corner enough to bind the reveal. We pull the panel, check the corner for square, and reset the frame or track as needed. This is the fix that generic window companies miss most often.
- Balancer spring failure in 8000 Series single hungs. The coil balancers inside an ES Windows single hung lose tension over time, especially on Pasadena’s south-facing walls where the heat loads are brutal. The symptom is obvious: the sash won’t stay up, or it slams shut when you let go. New balancers fix it, and we always check the shoe and pivot bar while we’re in there.
- Deteriorated wool pile weatherstripping. ES Windows uses wool pile weatherstripping at the meeting rails and jambs. Pasadena’s UV exposure breaks down the pile fibers, and Santa Ana winds push dust right through the gaps. You’ll see daylight at the corners or feel a draft on windy days. We replace it with a dense pile that seals tight without making the sash hard to operate.
- Flat-spotted rollers on tandem 3-lite sliders. A 3-panel ES Windows slider runs on tandem rollers, two per panel corner. When one roller flat-spots, the panel cocks slightly and scrapes the track. Left alone, it gouges the aluminum track and you’re replacing more than rollers. We check all six rollers on a 3-panel unit during any service call and replace them as a set.
One job that sticks with us: a Pasadena mid-century ranch with a 12-foot ES Windows 3-panel slider where the center panel had jumped its track. Both nylon rollers were flat-spotted and the floor track had shifted out of level. We removed the panel, replaced all six rollers with sealed-bearing units, and reset the track so the panel glides with one hand. That homeowner thought they needed a whole new door. They didn’t.
ES Windows Parts & Our Repair-vs-Replace Approach
We use quality aftermarket rollers, balancers, and weatherstripping that match or exceed ES Windows original specs. Why aftermarket over OEM? Because the aftermarket manufacturers we source from have improved on the original designs – sealed bearings instead of open, denser pile, stronger spring steel. You get a repair that outlasts the original part, and we’re not waiting weeks on a manufacturer parts shipment.
Through our Window Replacement services, we recommend full sash or panel replacement only when the aluminum frame extrusion is bent beyond safe straightening, or when a corner weld has cracked. Those are structural failures where repair would compromise the unit’s integrity. Every other time, we repair. It costs less, keeps your existing glass and frame in service, and gets done in one visit. For an exact diagnosis and a written quote, call (626) 657-5977 – estimates are free.
Our ES Windows Service Process – Step by Step
- 1
Diagnosis. We start by measuring the reveal on every operable panel, checking track level, and inspecting the rollers, balancers, and weatherstripping. For ES Windows specifically, we check corner square and look for the telltale dust streaks that signal a failing roller.
- 2
Repair or install. We write the price before we start, and you approve it. Then we pull the sash, replace the worn hardware, reset tracks if needed, and reinstall. Every part we use is specified for ES Windows geometry.
- 3
Test. We cycle every operable sash five times minimum. On a 3-panel slider, we check that all three panels glide independently and the interlocks engage at the meeting stiles. We also run a smoke pen around the weatherstripping on draft-prone walls.
- 4
Warranty. Every repair is covered by our 365-Day Done Right Promise – parts and labor, in writing. If something fails within a year, we come back and fix it free. No charge, no argument, second visit included.
ES Windows Products We Service & Install in Pasadena
We service the full ES Windows line that’s common in Pasadena homes. That includes the 8000 Series Aluminum Single Hung, the 9000 Series Aluminum Horizontal Roller, the 3-Panel Multi-Slide (3-Lite Roller), and Architectural Fixed/Picture units. We handle everything from single-roller swaps on a 9000 Series to full track resets and roller replacement on 12-foot 3-panel sliders. Our vans carry sealed-bearing rollers, balancer springs, wool pile, and track hardware sized for ES Windows aluminum extrusions, so most repairs go from diagnosis to done in a single visit.
We Also Service These Brands
ES Windows is one of eight product lines we work with daily. We also service and install PGT, CGI, CWS, and ECO Window Systems products. That matters because no single brand fits every Pasadena home, which is why we also offer Es Windows service in Glendale. When a repair or replacement is better served by a different manufacturer’s product, we’ll tell you straight and show you why.
FAQs – ES Windows Windows & Doors Service in Pasadena
No. We are an independent ES Windows service provider. We’re not a dealer or an authorized service center, and we don’t imply otherwise. What we are is a team with years of hands-on field experience repairing ES Windows 8000, 9000, and 3-panel multi-slide units across Pasadena. Our independence means we can choose the best part for the job, not the part the manufacturer wants us to sell.
We use quality aftermarket rollers, balancers, and weatherstripping that match or exceed ES Windows original specifications. In our experience, sealed-bearing aftermarket rollers and denser wool pile outlast the factory components, especially in Pasadena’s UV-heavy climate. If you specifically want OEM parts, we can order them, but we’ll always tell you when an aftermarket part is the better long-term choice. Call (626) 657-5977 to talk through your options.
Most single-window repairs, like a roller swap or balancer replacement on an 8000 Series single hung, take 60 to 90 minutes once we’re on site. A 3-panel slider with all six rollers and a track reset typically runs 2 to 3 hours. We’ll give you a time estimate at diagnosis, and you’ll get a live arrival time before we show up – no four-hour windows, no wondering when we’ll get there.
We service the ES Windows 8000 Series Aluminum Single Hung, 9000 Series Aluminum Horizontal Roller, 3-Panel Multi-Slide (3-Lite Roller), and Architectural Fixed/Picture units. That’s the core ES Windows line found in Pasadena’s Craftsman, Spanish Colonial, and mid-century ranch homes. If you have an ES Windows product that isn’t on this list, call us anyway – we’ll tell you honestly if we can help.
Here’s the straight answer: if your ES Windows product is still under the manufacturer’s warranty, any repair work we do could affect how the manufacturer treats that warranty. We’re not authorized by ES Windows, so we can’t speak for their warranty department. What we can tell you is that our workmanship carries its own 365-Day Done Right Promise, in writing, parts and labor. If you’re in your original warranty period, we’ll help you contact ES Windows first. If you’re out of warranty – and most Pasadena homes with original ES Windows units are – we’re the faster, more affordable fix.
Here’s a realistic range for ES Windows repairs in Pasadena: single-roller replacement runs $85 – $145 per window. Balancer spring replacement on an 8000 Series single hung runs $120 – $195 per sash. Weatherstripping replacement for a 9000 Series horizontal roller runs $95 – $165. A full 3-panel slider roller replacement with track reset runs $385 – $695 depending on panel count and track condition. Full sash replacement, where the aluminum extrusion is bent or a corner weld has cracked, runs $700 – $1,500. These are the numbers we quote over the phone when we can. For an exact written quote, call (626) 657-5977 – estimates are free, and the price locks before any work starts.
Book Your ES Windows Service in Pasadena, CA
If your ES Windows unit is dragging, derailing, or leaking air, we’ll diagnose it and give you a written price before a single screw turns. Call (626) 657-5977 to schedule your free estimate. A live person answers – 24/7.
Written by Sean Mackey, Owner at Juniper Windows Pasadena, serving Pasadena since 2001.
Six Reasons Homeowners Choose Juniper Windows Pasadena
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.