New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Pasadena pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ES Windows Sliding & Patio Doors: The Pasadena Owner’s Guide
We stock and install ES Windows-compatible sliding and patio door parts across Pasadena, with most roller, track, and lock replacements running $225 to $480 installed. Most parts we carry on the truck, so a single visit typically wraps up the job. How owners usually find us: the door starts needing two hands to move, scrapes against the track, or won’t latch at night. By the time we get the call, most people have been fighting that door for a few months, and the rail has worn unevenly from the drag.
Which ES Windows Models This Applies To
We work on the full ES Windows sliding and patio door range, including their earlier aluminum-framed series (common in Pasadena homes built in the 1980s and 1990s) and newer multi-chamber vinyl models. ES Windows has shifted frame profiles over the years, and a roller assembly from a 2005 unit won’t seat into a 2018 frame. That exact kind of gotcha is how we tell OEM from aftermarket decisions: if you have a recent model still under distributed warranty, we order the factory roller and track set. If the door is older or the part was discontinued, we spec an aftermarket assembly we’ve tested across hundreds of Pasadena installs. Check your door’s edge label or the four-digit series code stamped on the inside corner of the fixed panel. We’ll match from that number before we ever order a part.
Signs Your ES Windows Sliding & Patio Doors Is Failing
- The door grinds or scrapes as it moves. The rollers have flattened or seized, and every pass is chewing microscopic grooves into the track. Once the track starts to score, the repair cost climbs.
- It suddenly needs two hands. Even though it’s a different feel, that stiffness is the same root problem: worn roller bearings pulling hard against the track while debris builds up on the rail.
- The door won’t close flush or latches but leaves a gap. In most ES Windows units, the strike plate or the sliding panel’s rear alignment block has fallen out of spec. It’s usually a quick adjustment, not a full hardware replacement.
- Fog or condensation between the glass panes. In the December-to-March morning chill around Pasadena, failed IG seals become instantly visible. The frame may be fine but the glass pack needs replacing; we order IG units cut to size and handle the swap here.
- The handle won’t fully throw the deadbolt. A sticking handle is often a linkage misalignment inside the stile, not a bad lock. With the panel peeled back we can tell if it’s a linkage clip or a full multi-point assembly replacement.
Replacement Cost & What’s Included
In Pasadena, budget $225 to $480 for most ES Windows sliding door roller, track, or lock replacements installed. Simple roller swaps run at the low end; a full track-and-roller replacement on a double-panel energy door can reach $480. We write that dollar range on the estimate before we ask for a go-ahead. You see the part line, labor line, and disposal fee separately, in writing. If we install a part and it fails inside a year, Sean Mackey and our crew come back for free under the 365-Day Done Right Promise. No argument, parts and labor included. You’ll also get a digital invoice, photo proof when the work’s done, and a live technician arrival time if you book online.
DIY or Call Us?
A homeowner can usually pop off the snap-in bottom trim, vacuum the lower track, and check for visible roller wear. Most door panels weigh 120 to 220 pounds, so the moment the panel needs lifting out, call a pro. We’ve fished more than one bent corner and cracked frame out of a doorway where a solo DIY attempt went sideways. High-tension components aren’t really the issue on sliders like they are on garage doors, but a dropped panel will wreck tile, crush a foot, or bend the interlock where the latches catch. For track alignment, seized roller extraction, or glass replacement, call us at (626) 657-5977. We’ll send an estimate before the truck rolls.
FAQs
Plan on 15 to 20 years of service for the frame, with rollers and locks usually wearing out around year 10 here in Pasadena’s dry, dusty air. The constant dust works its way into bearing races and grinds rollers to metal-on-metal by the decade mark.
Sometimes. A sticking handle or a misaligned strike plate usually needs only a linkage adjustment, not a full hardware swap. If a roller has physically flattened or seized, replacement is the only fix that’ll last.
Most sliding door part swaps take an hour to 90 minutes on site. For full track replacements or IG glass swaps, we schedule a half-day so the sealants have time to cure properly.
Yes, we keep the common ES Windows rollers, track sets, handle sets, and lock assemblies stocked on our Pasadena service trucks. If your model needs an OEM piece we don’t carry, we’ll give you an order window before you commit.
Written by Sean Mackey, Owner, Juniper Windows Pasadena at Juniper Windows Pasadena, serving Pasadena and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Pasadena
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.