New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Pasadena pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Window Installation: The Pasadena Owner’s Guide
We stock and install CGI-compatible window parts across Pasadena, and a typical replacement runs between $220 and $640 installed, depending on the component and the series you own. Most owners discover a problem the hard way: a window that won’t close flush, a crank that spins without moving the sash, or a slide that suddenly grinds against the track. If you’re holding a broken CGI part or staring at a window that’s no longer doing its job, this page tells you what we know about getting it fixed the right way, with real prices attached.
Key Takeaways:
- CGI window part replacement in Pasadena typically costs $220-$640 installed, including the part and labor.
- We match your existing window’s series and measurements, then lock the price in writing before work begins.
- OEM CGI parts usually beat aftermarket equivalents on weatherstripping fit and finish tolerance.
- The 365-Day Done Right Promise covers every part we install, parts and labor, in writing.
Which CGI Models This Applies To
CGI’s impact-rated window lines, most commonly the Estate, Sentinel, and Targa series, each use slightly different hardware and sealing systems. A part from a Targa won’t necessarily drop into an Estate, even if the glass dimensions match. We see this get expensive for homeowners who order a part online, wait two weeks, and find the screw holes don’t line up or the weatherstripping channel is 2 millimeters too narrow.
The fastest way to identify your window’s series: look for the etched or printed CGI logo in the corner of the glass, then check the spacer bar between the panes. The series name is usually stamped there. If it isn’t, the original paperwork or the sticker on the inside frame channel will list it. When you call us, we’ll walk you through finding that label before we order anything. That step alone has saved Pasadena customers hundreds of dollars in wrong-part returns.
On the OEM-versus-aftermarket question, our position is specific: for CGI windows, buy the OEM part if the failure involves weatherstripping, corner seals, or any component that touches the waterproofing. CGI’s tolerances on those parts are tighter than the aftermarket equivalents we’ve tested. For cosmetic hardware like sash locks or lift handles, a quality aftermarket part can perform identically for $20-$40 less, and we’ll tell you when that’s the better call.
Signs Your CGI Window Installation Is Failing
- The window closes but you can see daylight at the corner: The corner seal or weatherstripping has compressed or torn. In Pasadena’s dry heat, rubber seals lose elasticity faster than they would in a coastal climate, and that’s usually the first thing to go on a CGI window that’s been in service for a decade.
- The crank turns but the sash doesn’t move: The crank gear or the operator arm has stripped. CGI uses a specific gear ratio on their casement operators, and a generic replacement will bind within the first few weeks.
- The sash slides but binds mid-track: The roller assembly has flat-spotted or the track has collected debris from Santa Ana wind season. If you force it, you risk bending the track, which turns a $60 roller swap into a $300 track replacement.
- Condensation appears between the panes: The insulated glass unit’s seal has failed. This isn’t a hardware problem, it’s a glass replacement, and it needs a proper glazing job to keep the impact rating intact.
- The window won’t stay locked: The lock’s cam or keeper has worn down. On impact-rated windows like CGI’s, a loose lock also compromises the structural integrity of the sash under load.
Replacement Cost & What’s Included
Here’s what we charge for CGI window part replacements in Pasadena, installed:
| Part / Service | Typical Installed Price |
|---|---|
| Weatherstripping replacement (per window) | $85 – $160 |
| Sash lock or lift handle | $120 – $190 |
| Roller assembly replacement | $140 – $220 |
| Casement crank and operator | $180 – $280 |
| Track replacement | $220 – $400 |
| Insulated glass unit replacement | $380 – $640 |
These prices include the part and the labor. What drives the range: the specific CGI series, whether the part is OEM or a quality aftermarket equivalent you approve first, and how much disassembly the job requires. A weatherstripping swap on a first-floor single window takes 30 minutes; a track replacement on a second-floor casement with a stripped frame screw takes considerably more.
Every quote we give you is a written price before work starts. If the job runs long, you don’t pay extra. If the part we install fails within 365 days, we fix it, parts and labor, in writing. That’s the Juniper standard, and it applies to every CGI part we touch.
DIY or Call Us?
There are a few things you can safely check before spending money: clean the track, tighten the visible frame screws, and look for obvious debris in the weatherstripping channel. If the issue is a loose handle screw, tighten it and see if that resolves the problem.
But here’s where DIY turns expensive: CGI impact-rated windows rely on precise frame alignment and proper seal compression. If you pry a sash out without depowering the hinge tension, you can bend the frame. If you replace weatherstripping with the wrong profile, the window loses its seal, and on a CGI that’s a waterproofing issue, not just an air leak. We’ve arrived at Pasadena homes where a well-meaning owner turned a $140 roller replacement into a $400 track job by forcing a bound sash. If the frame isn’t right, nothing else matters – let’s start there.
Call us at (626) 657-5977. We’ll diagnose it, quote it in writing, and have it done before your next dinner guest notices the window sticks.
FAQs
In our experience across Pasadena, CGI hardware typically lasts 10 to 18 years, with weatherstripping and seals on the shorter end of that range due to our dry heat and UV exposure. Rollers and operators often last 15-plus years if the tracks are kept clean and the windows are operated regularly.
Call (626) 657-5977 and tell us what window you own. We’ll give you an honest read on whether the remaining lifespan justifies a repair or a replacement.
Most hardware failures on CGI windows require a replacement part rather than a repair. A stripped gear or a flat-spotted roller can’t be re-machined; the part gets swapped. The exception is track cleaning and realignment, which we can sometimes perform without replacing anything. Call (626) 657-5977 for a free diagnosis.
Most CGI part replacements take 30 to 90 minutes on-site, assuming we’ve matched the correct component in advance. Weatherstripping and hardware swaps are typically under an hour. Glass unit replacements take longer because the new unit needs to be set, sealed, and checked for alignment before we leave.
Call (626) 657-5977 to schedule – we’ll give you a live arrival time and photo confirmation when the work is done.
We keep common CGI-compatible hardware in our Pasadena inventory: rollers, sash locks, lift handles, and weatherstripping profiles for the Estate and Sentinel series. Less common parts like Targa track assemblies or custom glass units are ordered with exact measurements from your window’s label.
Call (626) 657-5977 to find out what we have on hand for your model. And yes, we also stock parts for PGT, CWS, and ES Windows windows when the job calls for it.
Written by Sean Mackey, Owner, Juniper Windows Pasadena, serving Pasadena and nearby areas.
Juniper Windows Pasadena is an independent window and door installation specialist and is not affiliated with CGI. We install and service CGI products with genuine and quality-equivalent parts, and we stand behind every job with a written price and the 365-Day Done Right Promise. Call (626) 657-5977 for a free estimate.
Six Reasons Homeowners Choose Juniper Windows Pasadena
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.