New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Pasadena pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CWS Impact Garage Doors: The Pasadena Owner’s Guide
If you’ve got a CWS impact garage door that’s failing or a part that’s worn out, here’s what you need to know: we stock CWS-compatible components, we install them across Pasadena, and a full replacement typically runs $2,800 to $6,400 installed depending on size, track type, and whether you’re keeping the existing opener. Most part replacements like rollers, cables, or sensors run $190 to $480 and can be done in a single visit. You’ll usually notice the problem as a grinding noise, a door that hangs crooked, or a panel that won’t seal tight at the bottom. One morning it opens fine; the next, it’s fighting you halfway up the track.
We’re Juniper Windows Pasadena, an independent service provider. We’re not affiliated with CWS, but we work on their doors every week and know which parts hold up and which ones don’t in Pasadena’s dry, sun-baked climate.
Which CWS Models This Applies To
CWS impact garage doors come in several series, and the parts aren’t always interchangeable between them. The big three we see in Pasadena are the Signature (single and double-wide), the Designer Series (flush panel or raised panel), and the Legacy line, which tends to show up on older custom homes in neighborhoods like Linda Vista and San Rafael Hills. Each series uses its own hinge profile and roller channel, and mixing them causes the door to bind. Here’s the gotcha: CWS stamps a serial number on the inside face of the top section, usually on the left side. That number tells us the series, the year, and the exact track radius. Without it, we’re guessing. With it, we can match the part the first time.
On the OEM-versus-aftermarket question: for anything that moves, buy OEM or a quality equivalent with the same bearing spec. Cheap aftermarket rollers wear flat in two years and eat the track. For stationary parts like weatherseal and bottom retainers, a good aftermarket equivalent is fine and often costs 30% less with the same lifespan.
Signs Your CWS Impact Garage Door Is Failing
- Grinding or squealing during travel. That’s almost always a roller bearing gone dry and starting to seize. Left alone, it scores the track and turns into a $400 repair instead of a $180 one.
- Door hangs crooked or sags on one side. One cable has stretched or a hinge is bent. A crooked door overloads the opener’s rail and shortens its life by years.
- Panel won’t seat flat at the bottom. In Pasadena’s heat, the bottom rubber compresses and splits faster than on the coast. You’ll see daylight under the door and feel the draft.
- Opener runs but door barely moves. The torsion spring has lost tension or snapped. This is the dangerous one, see below.
- Visible rust or cracking at hinge points. Rusted hinges transfer every vibration into the door frame. Once they start flexing, the panel cracks around the mount.
Most of these show up within eight to twelve years on CWS doors in this climate. The sun does more damage than the rain here.
Replacement Cost & What’s Included
Here’s the honest pricing picture in Pasadena, because you shouldn’t have to call just to get a ballpark:
- Roller replacement (all 10 – 12), parts and labor: $180 – $320
- Cable replacement, both sides: $240 – $380
- Torsion spring replacement (single spring): $280 – $420; (dual spring) $380 – $560
- Bottom weatherseal and retainer: $140 – $220
- Hinge replacement (per panel): $90 – $160
- Full CWS impact door replacement, installed: $2,800 – $6,400 depending on width, insulation level, and window lites
Every job gets a written price before we touch the door. That price covers parts, labor, haul-away of the old components, and a walk-through of what we found. No change orders after the fact. The work itself is covered by our 365-Day Done Right Promise: if something isn’t right within a year, we come back and fix it. Parts and labor, in writing.
As a CWS owner, you may also find it helpful to know that we stock parts for PGT, CGI, and ES Windows systems too, so if the garage door project leads to a window issue elsewhere, we’re already set up to help.
DIY or Call Us?
Let’s be straight about the one part you should not touch: the torsion spring. It’s under enough tension to break bone or take off fingers. Even with the door down, that spring is loaded. We replace CWS torsion springs with the proper winding bars and the right spring rate for your door’s weight. This is not a YouTube project.
What you can safely check yourself: visual signs like cracked rollers, rusted hinges, or a bent track. You can also eyeball whether the door sits level when half open. If it doesn’t, don’t adjust anything. Call us at (626) 657-5977 and we’ll diagnose it. Sean Mackey will be the one to walk you through the findings, and he tends to explain the fix in plain terms so you understand exactly what you’re paying for. If the frame isn’t right, nothing else matters – let’s start there.
FAQs
Rollers and weatherseal last 6 to 10 years in Pasadena’s dry heat; torsion springs are rated for 10,000 cycles, which translates to roughly 8 to 12 years for most homeowners. Track and panels usually last 20 years or more unless a hinge fails and stresses the frame. If your door is past year ten and original, plan for a roller and spring refresh soon. Call (626) 657-5977 and we’ll tell you what’s left in each component.
Sometimes. A noisy roller can be cleaned and regreased if the bearing isn’t shot, and a minor track bend can be straightened if it hasn’t kinked. But cables, springs, and cracked hinges are replacement items; patching them isn’t safe. We’ll tell you straight whether a repair will hold or whether you’re throwing money at a part that fails again in six months. Estimates are free.
Most single-part replacements like rollers, cables, or weatherseal take 45 minutes to 2 hours. A torsion spring swap runs 1 to 2 hours including balance testing. A full door replacement is a one-day job in Pasadena most of the time. We give you a live arrival time and send before-and-after photos, so you know exactly what was done even if you can’t watch the whole job.
We stock the common movers: rollers, cables, springs, hinges, and weatherseal for the CWS Signature, Designer, and Legacy series. Uncommon parts like a specific panel section or a custom track radius are ordered and typically arrive within a week. Either way, you get a written price before any work starts.
Written by Sean Mackey, Owner, Juniper Windows Pasadena at Juniper Windows Pasadena, serving Pasadena and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Pasadena
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.