New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Pasadena pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ECO Window Systems Window Installation: The Pasadena Owner’s Guide
ECO Window Systems window installation in Pasadena typically runs $185 – $420 per window for the installation labor and sealing when you already have the replacement sash or frame component, or $340 – $780 per window if we’re pulling the old unit and setting a new ECO Window Systems window into the existing rough opening. We stock ECO Window Systems-compatible balances, pivot bars, tilt latches, and glazing on our Pasadena trucks, so most window installations and part replacements happen in one visit. You’ll usually find us here because a sash won’t stay up, a crank spins without moving anything, or a window that used to glide now needs two hands and a hip check to close. Pasadena’s dry heat and strong afternoon sun bake window weatherstripping faster than coastal climates do, so a window installed eight or ten years ago may now be fighting you every time you open it.
We’re an independent windows-and-doors contractor in Pasadena, not a factory rep for ECO Window Systems, which means we can install their windows and match their hardware without being married to a single solution. If the frame is square and the sash is sound, we’ll save you money by replacing exactly the part that failed. If the frame has shifted or the glass has failed, we’ll tell you that too, before any work starts.
Which ECO Window Systems Models This Applies To
We install and service the ECO Window Systems product family most commonly found in Pasadena homes built or renovated between roughly 2004 and 2020, including their single-hung, double-hung, horizontal slider, and casement lines. The compatibility gotcha most people hit: ECO Window Systems has changed pivot-bar and balance-shoe profiles across their series over the years, so a balance that fits a 2016 double-hung will not seat properly in a 2009 model, even when the visible sash dimensions match within a quarter inch. You can’t identify the right balance by window width alone.
Here’s how to check what you have before you call. Slide the lower sash up about three inches. Look at the side of the sash where it meets the track. You’ll see the pivot bar, a small metal tab that snaps into the balance shoe. On most ECO Window Systems units there’s a stamped code on the pivot bar or on the top edge of the lower sash rail, like PC-19 or BSS-11. Snap a photo of that with your phone, plus a photo of the window with a tape measure across the visible glass width. That’s usually enough for us to bring the right part on the first trip. When an OEM balance is backordered or discontinued, we use quality aftermarket equivalents from suppliers we’ve tested in San Gabriel Valley heat. We won’t use an aftermarket part unless it matches the original’s weight rating and travel length.
Signs Your ECO Window Systems Window Installation Is Failing
- Sash won’t stay up or slides down when released. This is almost always a failed spring balance in the side track. Single-hung ECO units carry the full sash weight on two balances, and when one lets go, the other side drags or the sash drops. The pivot bar may still be fine.
- Window is suddenly hard to lift or close. In Pasadena, fine dust and dry air work into the balance shoe track and the pivot bar. Without lubrication or cleaning, the sash binds. If you hear a gritty scrape when you move it, the shoe is grinding against a worn balance.
- Lock catches but the sash still rattles or leaks air. The lock may be engaging, but if the keeper has loosened or the sash has sagged from a worn balance, the meeting rails don’t press together. That air gap is where afternoon heat enters and air conditioning escapes.
- Tilt latch snaps or feels brittle. ECO tilt latches are spring-loaded plastic. Years of UV exposure in a south-facing Pasadena room makes that plastic brittle. It’s a small part, but when it breaks, the sash won’t lock into the track correctly.
- Crank turns without moving the window. On casement models, a stripped operator gear or a sheared pin disconnects the crank from the arm. The window is effectively dead until that operator is replaced, and the fix isn’t to crank harder. Forcing it strips the splines further.
Replacement Cost & What’s Included
For a typical ECO Window Systems window installation in Pasadena, here’s what our pricing looks like, parts and labor together:
- Spring balance replacement (single sash): $185 – $260 per sash
- Tilt latch or pivot bar replacement: $95 – $150 per window
- Casement operator replacement: $220 – $310 per window
- Weatherstripping and re-alignment without paint: $140 – $220 per window
- Full window replacement with a new ECO Window Systems unit: $340 – $780 per window, depending on size, frame material, and opening condition
Those Pasadena prices include the part, the labor, sealing, cleanup, and disposal of the old component. Before any work starts you’ll have a written price for the full job. No estimate that turns into a surprise at the door. If the window needs more than the part you called about, we document it with photos and give you a new written price for the additional scope before touching anything. Every installation is covered by our 365-Day Done Right Promise: if the work isn’t right, we make it right, parts and labor, in writing, for a full year.
DIY or Call Us?
There are things you can check safely before you spend a dollar. Remove the window screen and inspect the track. If you see caked dust, old caulk, or a paint line sealing the sash to the frame, that’s worth cleaning with a dry brush before calling anyone. On the other hand, window sashes under spring tension, especially a double-hung with balances still loaded, are genuinely dangerous. Releasing a balance shoe incorrectly sends the spring bar flying with enough force to take off a fingertip. This is a job where the thirty-minute professional repair costs less than an urgent-care visit.
We’d rather talk you out of a repair you don’t need than into one you do. Call us at (626) 657-5977, and we’ll ask you to hold the phone up to the window while you describe what it’s doing. That conversation is free, and it usually tells us whether the fix is a $22 part or a full replacement.
FAQs
In Pasadena’s climate, you can expect the factory balances and weatherstripping in an ECO Window Systems window to last 8 to 12 years with normal use; the frame and sealed glass typically last 20 years or more. South- and west-facing windows fail faster because afternoon sun cooks the vinyl and plastic hardware, so a room-facing wall exposed to full sun often needs balances replaced several years before shaded windows do.
No. A balance that has lost tension cannot be re-tensioned or rebuilt in the field, and glued or jury-rigged balances fail again within weeks. We replace broken balances with new OEM or verified aftermarket parts matched to the sash weight, rather than trying to patch a spring that has already fatigued. Call (626) 657-5977 and we’ll quote the exact part for your model.
A single-sash balance or pivot bar swap takes 30 to 60 minutes in most Pasadena homes, and we carry the common ECO Window Systems balances and hardware on our trucks. A full window replacement into an existing opening usually takes two to three hours from start to cleanup, depending on stucco work and interior trim removal.
Yes. Our Pasadena trucks carry ECO Window Systems pivot bars, tilt latches, and the most common spring balances, plus the sealing supplies needed to install or re-bed a window the same day. If your model needs a special-order balance or a different size operator, we tell you on the phone before we schedule, not after we arrive. When an OEM part is weeks out, we can often supply a quality aftermarket equivalent that we’ve tested and warrant in writing.
If you’ve got an ECO Window Systems window in Pasadena that’s starting to fight you, don’t wait until it won’t close at all. Call us at (626) 657-5977 for a free estimate on the repair or replacement. You’ll get a real person on the phone, a written price before anything starts, and a window that works the way it should, backed in writing for 365 days.
Written by Sean Mackey, Owner, Juniper Windows Pasadena at Juniper Windows Pasadena, serving Pasadena and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Pasadena
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.