New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Pasadena pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Windows & Doors in Glendale, CA | Juniper Windows Pasadena
We provide independent Mr-Glass windows & doors service across Glendale, and the biggest difference here comes down to one thing: rusted steel casements. This city has thousands of original 1930s Mr-Glass steel-frame windows, many frozen solid from decades of sprinkler overspray. Our crew cuts them out, rebuilds them, and gets them operating again without wrecking the Spanish Colonial lines homeowners love. Call (626) 657-5977 for a free estimate on any Mr-Glass repair or Window Replacement - Glendale.
Why Glendale Residents Choose Us for Mr-Glass Service
Most window companies in Glendale want to sell you a whole new window. We’d rather fix what you have when it makes sense. Sean Mackey, our owner, trained at Los Angeles Trade-Technical College and has spent two decades obsessing over frame sizing, weatherstripping, and threshold alignment. He’s the kind of guy who keeps a battered field notebook in his truck with measurements and tricks that never make it online, but save homeowners real money. We know Mr-Glass model lines cold: the 4500 Series single-hungs, the 8000 Series horizontal rollers, the old 6000 Series sliders. That familiarity means we diagnose faster and quote accurately. Every job gets a written price before any work starts, backed by our 365-Day Done Right Promise. If it’s not right, we make it right, parts and labor, for a full year.
Common Mr-Glass Windows & Doors Problems We Solve in Glendale
- Rusted-shut steel casements. Glendale’s Rossmoyne and El Miradero neighborhoods are full of 1930s steel-frame Mr-Glass casements that haven’t opened in years. Sprinkler overspray hits the bottom hinges season after season. We cut out the frozen hardware with a grinder, rebuild the sash with steel inserts, and add modern weatherstripping so they actually operate.
- Fogged insulated glass units. Glendale’s intense UV and thermal swings break the seal on older Mr-Glass double-pane units. You get permanent haze and losing the insulating gas. We replace the IGU while keeping your original frame profile intact, which matters on historic homes.
- Warped or cracked wood frames on 1950s ranch homes. Those hot, dry summers were brutal on Mr-Glass single-hungs in the Verdugo Woodlands and Sparr Heights. Wood expands, contracts, and eventually splits. Sometimes we can square the frame and re-glaze; other times, an insert replacement is the better call.
- Sticking or derailed Mr-Glass aluminum sliders. Mid-century Glendale ranches are loaded with 6000 Series 3-panel sliding doors. The roller assemblies corrode, the tracks wear, and suddenly you’re fighting a door that jumps the rail. We replace rollers and realign tracks, or swap the whole panel if the extrusion is bent.
- Failed hardware on 8000 Series horizontal rollers. These were a workhorse in Glendale apartments and condos. Latches snap, roller bearings disintegrate. We stock common aftermarket parts locally, so turnaround is often days, not weeks.
Mr-Glass Service in Glendale: What Local Conditions Mean for Your Equipment
Here’s the thing about Mr-Glass steel casements in Glendale that you won’t hear from a generic window company: the rust problem in Rossmoyne and El Miradero is worse than anywhere else in the region. Drive up North Kenwood Street and you’ll see dozens of original 1930s steel-frame windows with rust blooms at the bottom corners. In Burbank, most of these windows were replaced decades ago. In La Cañada Flintridge, larger lots mean sprinkler heads rarely sit close enough to the house to soak the frames. Glendale’s tighter lot lines and Spanish Colonial landscaping patterns put irrigation spray directly on the steel. If the frame is still structurally sound, we cut out the rusted hinges with a cutoff wheel, treat the steel, and rebuild the sash so it opens like new. If the frame is so corroded it’s lost its structural integrity, we recommend a full-frame Mr-Glass-compatible replacement, and we match the original sightlines so the house doesn’t lose its character. “If the frame isn’t right, nothing else matters, let’s start there.”
Mr-Glass Models & Products We Service in Glendale
We work on the full Mr-Glass line you’ll find in Glendale homes. The 4500 Series single-hung windows show up on thousands of 1950s ranches. The 8000 Series horizontal rollers are common in multi-family buildings along Brand Boulevard. The 6000 Series 3-panel sliding doors dominate mid-century patios. The 3000 Series fixed picture windows are what you’ll see framing the San Gabriel Mountains from living rooms north of Glenoaks. For parts, we use OEM Mr-Glass components when they’re available and cost-effective. On older models no longer in production or when lead times are dragging, we source high-quality aftermarket parts from regional suppliers, often the same manufacturers who made the originals. Our rule is simple: if the frame is sound and only hardware or glass is compromised, we repair. If the frame is rusted through or badly distorted, we recommend replacement with a modern Mr-Glass-compatible unit.
Mr-Glass Service Pricing in Glendale
Mr-Glass repair pricing in Glendale runs roughly $85 to $150 for a diagnostic visit, which is waived if you proceed with work. Replacing rollers and re-aligning a 6000 Series sliding door track typically lands between $180 and $340. Fogged IGU replacement on an original steel casement usually runs $220 to $420 per sash, depending on glass size and low-E requirements. Cutting out and rebuilding a rusted steel casement with new hardware and weatherstripping falls around $450 to $750 per window. A full insert replacement for a 4500 Series single-hung with the frame intact runs $900 to $1,600 installed. A full-frame replacement of a rusted steel casement starts around $1,800 per window. Your free estimate includes a written line-item price covering labor, materials, and disposal, so there’s no guesswork. Call (626) 657-5977 to schedule yours.
Serving Glendale, CA - Our Local Coverage Area
We’re based in the Glendale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Windows & Doors in Glendale
Yes, we can rebuild most of them. We cut out the rusted hinges with a cutoff wheel, treat the steel with corrosion inhibitors, install new pivot hardware, and add weatherstripping. If the frame itself is still square and structurally sound, the window can be salvaged and will open again. Our team recently restored a 1938 Spanish Colonial on North Kenwood Street where three Mr-Glass steel casements were frozen solid. After we rebuilt the sash stiles with steel inserts and replaced the original single-pane glass with double-pane low-E units, the owner opened those windows for the first time in decades. Call (626) 657-5977 for an honest assessment, no charge to come look.
If the frame and glass are intact, start with the rollers. We replace corroded roller assemblies and worn tracks on Mr-Glass 6000 Series sliders for $180 to $340, and that fixes the sticking or derailment most of the time. If the extrusion is bent from years of wrestling the door open, or the glass seal has failed, full panel replacement makes more sense. We’ll tell you before you spend a dollar. Call (626) 657-5977 for a free estimate.
That depends on what’s failing. If it’s just hardware or a fogged IGU, repair is usually worth it, and it gets you several more years for a fraction of replacement cost. But 1980s Mr-Glass windows weren’t built for Glendale’s UV and thermal swings. If the frame is warped or the glass has failed in multiple sashes, you’re better off with an insert replacement using modern low-E glass that cuts heat gain and your cooling bill. Call (626) 657-5977 and we’ll walk through your options with real numbers.
Yes, in most cases. We remove the failed insulated glass unit and install a new double-pane IGU while keeping your original Mr-Glass frame. This works on 4500 Series single-hungs, 3000 Series picture windows, and even the old steel casements. Expect $220 to $420 per sash depending on size and glass spec. For exact numbers on your windows, call (626) 657-5977, and we’ll give you a written quote at no charge.
We measure the rough opening precisely, order a custom-fit Mr-Glass-compatible insert built to the original frame dimensions, then set it inside the existing frame and trim it out. The original exterior stucco and interior woodwork stay untouched, which matters on Spanish Colonial homes where the arched details and multi-pane sightlines define the character. Expect $900 to $1,600 per window for Window Installation - Glendale. Our estimate is free, and it’s a written fixed price with no change orders. Call (626) 657-5977 today.
Service Areas Near Glendale
Our Mr-Glass technicians serve Glendale and the surrounding communities daily. You’ll find us in Mr-Glass service in Pasadena, Mr-Glass service in Alhambra, as well as Altadena, Los Feliz, and Maywood. If your Mr-Glass windows or doors need attention anywhere in the San Gabriel Valley or Northeast LA, we’re close by. For a broader look at our coverage, visit our Glendale service area page. To see the full range of what we offer, check Mr-Glass sales & service.
Book Your Mr-Glass Service in Glendale Today
If your Mr-Glass windows or doors in Glendale are fogged, sticking, rusted, or just worn out, call (626) 657-5977. We’ll schedule a free estimate, give you a written price before any work begins, and back the install with our 365-Day Done Right Promise. Book in a tap, track your technician’s live arrival time, and see before-and-after photos of every job.
Written by Sean Mackey, Owner at Juniper Windows Pasadena, serving Glendale since 2001.
Six Reasons Homeowners Choose Juniper Windows Pasadena
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.