New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Pasadena pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Door Replacement Across Boyle Heights
Door replacement in Boyle Heights usually runs $900 – $3,400 depending on whether we’re swapping a slab, reframing a rough opening, or rebuilding casing to match a 1920s original. Most jobs on the pre-war homes around Mariachi Plaza, El Sereno, and the flats near Hollenbeck Park take one to two days once materials land. That’s the honest range. We serve Boyle Heights directly, we know these old frames, and we answer the phone when you call (626) 657-5977.
Why Juniper Windows Pasadena Is Boyle Heights’s Preferred Door Replacement Company
Boyle Heights door work is different from the tract-home swaps you see in newer parts of LA. The housing stock here runs 1900s through 1930s: wood framing, stucco exteriors, solid-wood doors with original hand-blown glass, and rough openings that have settled out of square over a century. We send background-checked, uniformed technicians who understand what’s behind those walls and what a permit inspector will look for once a frame comes out.
Sean Mackey has built Juniper Windows Pasadena around a rule that matters on old homes: a written price before anything gets unscrewed. When we open a Boyle Heights wall and find what’s actually there, you’ll see it in writing before we touch it, not as a surprise on the final invoice. That’s the 365-Day Done Right Promise in action: 365 days, parts and labor, in writing. If the work isn’t right, we make it right. No charge, no argument, and a free second visit if a repair fails.
Every door project starts with the Relay Standard: book in a tap, track a live arrival time, receive before-and-after photos, approve a written price, and pay the digital invoice from a link. That’s how Boyle Heights homeowners should expect a contractor to work.
Door Contractors in Boyle Heights
Door Contractors in Boyle Heights handle the full replacement, from pulling the old slab to setting the new unit, reframing the rough opening, and rebuilding casing and trim. On a pre-war home, this is rarely a simple slab swap. The existing opening usually needs modification to accept a modern, properly sealed door. A straightforward contractor-level replacement with standard slab and minimal framing work runs $900 – $1,800 in Boyle Heights. When we reframe an out-of-square opening and rebuild casing to match original Craftsman details, expect $2,000 – $3,400.
Custom Openings on Pre-War Frames
Most Boyle Heights doors from the 1900s – 1930s were set into openings sized for the original hand-built door. Modern pre-hung units don’t match those dimensions. We measure the rough opening, assess the jamb condition, and either custom-mill a new frame or reframe entirely. The job is planned around the existing structural conditions, not the other way around.
Pull, Reframe, Reset
When we remove a door and find the framing undersized or racked, we correct it before the new unit goes in. That prevents binding, air leaks, and seasonal flex that shows up six months later when the humidity shifts. The work is priced in writing before we start, and any hidden condition discovered mid-job gets approved by you in writing before we proceed.
Door Frame Repair in Boyle Heights
Door Frame Repair in Boyle Heights focuses on the jamb, casing, threshold, and structural framing that surround the door itself. Old wood jambs rot, settle, and separate. Termites and dry rot are common in the stucco-built bungalows along Soto Street and Cesar Chavez Avenue. In Boyle Heights, a frame repair with a reused slab typically runs $600 – $1,400. Rebuilding a frame with new wood, flashing, and sealing adds $400 – $700 depending on what we uncover.
Dry Rot and Square-Up Work
We remove the damaged section, treat the remaining framing, and reframe to a true rectangle before reinstalling the door. On a 1920s bungalow off Soto Street, we pulled a sagging solid-wood front door and found the original jamb eaten by dry rot; the rough opening was 2 inches out of square. Our crew reframed it to spec, installed a Therma-Tru fiberglass door with impact-rated glazing and a laminated glass interlayer, then rebuilt the casing to match the original stucco profile. The final assembly carried a Florida Product Approval and the homeowner’s insurer applied wind mitigation credits.
Hidden Conditions and Permits
Boyle Heights homes frequently hide knob-and-tube wiring and failed waterproofing behind old door frames. Our crew opens the wall, documents what’s there, and brings it to your attention with a written price before any remediation starts. For any structural change or exterior opening work, we pull permits and pass inspections. The paperwork matters on these older properties, and the inspector will look for code compliance once a frame is exposed.
Trusted Brands We Service in Boyle Heights
We install and service doors from Therma-Tru, plus impact-rated systems from CGI and ES Windows. For Boyle Heights customers, we stock common components locally so a replacement part doesn’t sit in a shipping queue. If you need a historically sympathetic door that still meets modern energy code, we can pair a Therma-Tru fiberglass slab with custom oak casing milled to match the original profile. We also work with ECO Window Systems for glazing and side lights that fit older frame proportions. Juniper is named for a hardy evergreen built to handle sun, wind, and cold, and on Boyle Heights doors, the same holds true: the right product line matters for how a unit performs over decades, not just on install day.
Common Door Replacement Problems We See in Boyle Heights Homes
- Out-of-square rough openings. A century of settling means the frame is rarely a true rectangle anymore. A new pre-hung door installed into that opening will bind within the first seasonal shift, so we square the rough opening before setting anything.
- Mismatched slab-and-casing replacements. Replacing only the door slab while leaving the original 1920s jamb and casing creates a visual clash. We rebuild casing and trim to match the home’s original Craftsman details, so the new door looks like it belongs.
- Hidden knob-and-tube wiring. Boyle Heights pre-war homes often carry original wiring behind door frames. When we open the wall to replace a frame, that wiring may need remediation to current code before the permit closes.
- Failed waterproofing around exterior doors. Stucco exteriors wick moisture into the frame over decades. We find and replace failed flashing, sill pans, and sealing before the new unit goes in, preventing the rot from returning.
Pricing for Door Replacement in Boyle Heights, CA
A slab-only replacement on a standard, in-square opening in Boyle Heights starts around $900. A full door contractor job with custom reframing and casing restoration lands between $2,000 and $3,400. Frame repair alone, reusing your existing door, runs $600 – $1,400. Impact-rated glass such as CGI or ES Windows adds $700 – $1,200 depending on size and product line. Every estimate is written, line-itemed, and locked before any work starts. There’s no vague “it could go higher” we hand you at the door. Call (626) 657-5977 for an exact quote, and we’ll walk you through what your specific home needs.
We Also Serve Cities Near Boyle Heights
Our Door Replacement crews serve Boyle Heights plus the surrounding LA area, including Pasadena, Glendale, Alhambra, and Altadena. If you’re just outside the Boyle Heights boundary, we’re close by and carry the same product lines and written-price commitment across the metro. Every nearby job still gets the same live arrival time, photo updates, and digital invoice through the Relay Standard. View our Door Replacement in Boyle Heights page for the local specifics.
Serving Boyle Heights, CA - Our Local Coverage Area
We’re based in the Boyle Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in Boyle Heights
Yes, when the work changes the structural opening, reframes the rough opening, or alters the exterior envelope, a permit is required in Boyle Heights. A simple slab swap with no framing change usually doesn’t require one. We pull permits and pass inspections on every job that calls for them, and the cost is included in your written estimate. Call (626) 657-5977 and we’ll tell you exactly what your project triggers.
We custom-mill the casing and trim to match the original profile, whether that’s a wide flat-stock Craftsman board or a narrower Colonial style. For homes where the original casing is salvageable, we repair and reuse it. You keep the historic look without shop-bought trim that misses the proportions. We’ll show you samples and profiles before cutting begins.
We stop, document it with photos, and put a written price in front of you before doing any remedial work. You approve the change order first, then we repair the framing, replace flashing and sill pans, and treat for termites if needed. Nothing gets touched without your approval in writing.
Yes. We pair a Therma-Tru fiberglass door or a CGI impact-rated unit with custom wood casing and glazing that follows the original sightlines. The result reads as a period-appropriate door while giving you insulated core construction and impact-rated glass, which your insurer may credit for wind mitigation. We’ll walk you through the options for your specific home’s architecture.
Because the homes were built between the 1900s and 1930s, and the original rough openings were sized for hand-built doors that didn’t follow modern dimensional standards. A century of settling, moisture, and termite activity has pulled most of those openings out of square. Setting a new pre-hung unit into a racked opening causes binding, air leaks, and gaps, so we square the framing first. That’s the correct sequence on an old home, not a shortcut.
Written by Sean Mackey, Owner at Juniper Windows Pasadena, serving Boyle Heights.
Six Reasons Homeowners Choose Juniper Windows Pasadena
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.