New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Pasadena pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Replacement Across Boyle Heights
Window replacement in Boyle Heights costs between $450 and $1,400 per window for most pre-war homes, with full-frame replacements on 1920s bungalows running $900 to $2,200 when custom millwork is required. We’re the crew that shows up when we say we will, with a live arrival time you can track on your phone. If you’re in Boyle Heights and tired of drafty single-pane windows, call (626) 657-5977 for a free estimate. We know these streets, these houses, and what opening up a 1920s wall actually reveals.
Why Juniper Windows Pasadena Is Boyle Heights’s Preferred Window Replacement Company
We’ve worked on enough Boyle Heights homes to know the wavy glass in a front window on Breed Street or Soto isn’t just a window. It’s part of the house. Our crews respect that, and our written pricing means you’ll never get a call saying the scope changed and the price doubled. When you book through Juniper, you get the Relay Standard: a live arrival time, before-and-after photos of every job, and a digital invoice you can pay from a link. Every project carries the 365-Day Done Right Promise, which covers parts and labor in writing for a full year. Sean Mackey leads our team, and he holds every job to the same rule: if the work isn’t right, we make it right.
Dispatch and scheduling run through our Los Angeles office, but the crew that shows up to your Boyle Heights home works locally and knows the housing stock. That matters when your jambs are shimmed with cedar shingles from 1923 and your rough opening is 3/8 inch out of square.
Window Repair in Boyle Heights
Window repair in Boyle Heights typically runs $180 to $550 for sash replacement, reglazing, or hardware fixes on older wood windows. We repair rather than replace whenever the frame is sound and the glass can be salvaged. In Boyle Heights, that often means keeping the original wavy hand-blown glass and rebuilding the sash around it. If your double-hung won’t stay up, there’s rotted wood at the sill, or the window won’t lock, repair is usually the right call. We’ll tell you honestly if a repair won’t hold and a replacement makes more sense. Call (626) 657-5977 and we’ll take a look.
Sash and Jamb Rebuilds
Old double-hungs on 1900s and 1920s houses in Boyle Heights wear out at the sash cords and the meeting rails. We rebuild the sash, replace the cord or spring balance, and square up the jamb. The finished window operates like it did when the house was new.
Reglazing Wavy Glass
That wavy glass can’t be bought anymore. When the putty fails and the pane rattles, we remove the old glazing, reset the glass, and apply fresh putty. The character stays, the drafts go.
Window Replacement Company in Boyle Heights
As a window replacement company working in Boyle Heights, we replace windows on homes where the original single-pane units have failed or the homeowner wants energy efficiency without losing the house’s character. Most Boyle Heights jobs run $450 to $1,400 per window, and full-frame work with custom millwork lands between $900 and $2,200 per opening. We install PGT, CGI, and CWS products, and for period-sensitive homes we spec double-hungs with Low-E insulated glass that match the original sightlines. Our Window Replacement team handles the permit, the inspection, and the paper trail. You get a written price before we order a single window.
Full Frame Replacement
When the jamb is rotted or the rough opening is out of square, a full frame replacement is the honest fix. We tear out the old frame, rebuild the rough opening, and install a new frame that actually fits the opening. No oversized caulk joints.
Insert Window Replacement
If the existing frame is solid and square, an insert window drops into the old frame and trims out clean. It’s faster, less invasive, and usually cheaper. We’ll tell you if your house qualifies, and we’ll tell you if it doesn’t.
Trusted Brands We Service in Boyle Heights
We install PGT, CGI, CWS, and ES Windows in Boyle Heights, and we stock local parts for these lines so turnaround stays short. PGT offers impact-rated glass built to resist wind-borne debris without shattering, CGI does the same with a heavier commercial profile, CWS gives us strong vinyl options for budget-conscious retrofits, and ES Windows covers custom aluminum work. We don’t push a brand that doesn’t fit the house. We spec what matches the opening, the style, and your budget, then price it in writing. That’s the whole approach.
Common Window Replacement Problems We See in Boyle Heights Homes
- Hidden termite damage in original framing. The 1900s framing around a window can look fine from the trim side and be hollow behind it. We find this on maybe a third of the older homes we open up near Cesar Chavez and Soto.
- Undersized headers over pre-war openings. Boyle Heights builders sometimes used a single 2×4 where code now requires a proper header. Once the wall is open and the inspector sees it, the header gets upgraded. We plan for this in writing before we start.
- Standard window sizes don’t fit. Off-the-shelf windows assume a square opening. Boyle Heights pre-war openings vary by as much as an inch in any direction. A replacement that’s “close enough” leaves a caulk joint that fails and lets water in.
- Failed waterproofing under stucco. Water gets behind the stucco at the window perimeter, rots the sheathing, and nobody sees it until the window comes out. We address it before it becomes a whole wall section rebuild.
Pricing for Window Replacement in Boyle Heights, CA
A typical vinyl insert window replacement in Boyle Heights runs $450 to $900 per window. A full frame replacement on a 1920s house with custom millwork and matching wood jambs runs $1,200 to $2,200 per opening. Sash repair and reglazing usually lands between $180 and $550. Paint-grade interior trim, exterior stucco repair, and permit fees can add $200 to $600 per opening depending on the house. We give you a line-item written price before any work starts, including an allowance for the framing repairs we expect to find once we open the wall. If we find something the inspector flags that wasn’t in the allowance, it gets priced and approved in writing before we touch it. Call (626) 657-5977 for a free estimate. That’s the number.
We Also Serve Cities Near Boyle Heights
Our crews handle Window Replacement in Boyle Heights and the surrounding neighborhoods, including Pasadena, Glendale, Alhambra, and Altadena. If you’re nearby and want a real person to answer when you call, we do that. The number again is (626) 657-5977.
Serving Boyle Heights, CA - Our Local Coverage Area
We’re based in the Boyle Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Replacement in Boyle Heights
Yes, sometimes. When we open a wall and the city inspector sees outdated wiring or undersized framing, code requires those items be brought up to current standard before we close up. That’s not a surprise we let happen after the fact. Our initial inspection includes a written allowance for the most common code upgrades we find in Boyle Heights pre-war homes, and any addition gets priced and approved in writing before work continues. Call (626) 657-5977 if you want us to walk your specific house.
Yes, and you should. Hand-blown wavy glass from the 1900s can’t be matched today, and it’s worth preserving. We can reset the original panes in a new sash or frame, or reuse the glass in a transom or accent window. We’ll factor the labor into your written price up front. It costs a little more, and it keeps the house’s face intact.
Rotted framing behind the original trim. On a 1920s bungalow near Breed Street, we pulled a rotted sash to find the original jamb shimmed with cedar shingles and the rough opening out of square by 3/8 inch. We rebuilt the opening, installed a custom double-hung with Low-E insulated glass in a matching wood jamb, and reused the wavy glass in a transom. Every change was priced and approved in writing after the initial inspection. That’s how we work.
Not formal rules in most cases, but the Boyle Heights housing stock is largely single-family homes and small multi-family buildings from the 1900s to 1930s, and original character matters to the street. Double-hung windows with true divided lites or wavy glass are common, and replacing them with off-the-shelf vinyl sliders changes the look of the whole facade. We spec windows that match the original sightlines and use custom millwork where the openings are non-standard. Call us and we’ll show you what the options look like on your actual house.
Most single-window replacements in Boyle Heights take one to two days once we’re on site, and hidden framing repairs can add a day or two per opening. A whole-house replacement on a 1920s home typically runs one to three weeks depending on how many windows and what we find when we open the walls. We give you a written schedule before we start and update it in writing if the scope changes. The 365-Day Done Right Promise covers the completed work for a full year, parts and labor. For an exact timeline on your house, call (626) 657-5977.
Your Windows, Written Price, Done Right
Boyle Heights houses deserve windows that work, and a price that doesn’t move. We’re Juniper Windows Pasadena, part of the Relay Home Co. family. Sean Mackey runs our crew with one rule: every job gets a written price before a single screw turns. If you’re ready to fix the drafts, keep the wavy glass, and know exactly what it costs, call (626) 657-5977. Free estimates, real answers, no phone tag.
Written by Sean Mackey, Owner at Juniper Windows Pasadena, serving Boyle Heights through the Relay Home Co. family.
Six Reasons Homeowners Choose Juniper Windows Pasadena
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.